Skip to main content
COVID-19
How we are responding to COVID-19

Development

Community Libraries Online Resources Laptop Typing

Standard Civil Details

The following downloads provide standard details relating to civil engineering infrastructure.

This information is relevant to architects, building designers and engineers in the preparation of documentation for development applications or civil engineering works and the general public for any kind of construction you may wish to undertake on Council land (eg. driveways, drainage, trench reinstatement, footpath reinstatement).

For further information, please contact Civil Design, Technical Services (08) 8406 8222

Downloads

SD-01 – 150mm barrier kerb with 380mm fall-in water table

SD-02 – 150mm barrier kerb with 380mm fall-out water table

SD-03 – 200mm barrier kerb with 380mm fall-in water table

SD-04 – 200mm barrier kerb with 380mm fall-out water table

SD-05 – 150mm semi-mountable kerb for splitter island

SD-06 – 150mm semi-mountable kerb with 300mm fall-out kerb

SD-07 – 70mm mountable kerb for mini-roundabouts

SD-08 – 100mm mountable kerb with 380mm gutter for house drain outlets

SD-09 – 100 / 150mm high barrier kerb for inner annulus of regular roundabout

SD-10 – 760mm spoon drain

SD-11 – Kerb ramp detail (G6)

SD-12 – Residential driveway kerb crossing for 150mm fall-in kerb

SD-13 – Residential driveway longitudinal crossover detail

SD-14 – Complying residential entrance

SD-15 – Complying light duty commercial entrance

SD-16 – Complying heavy duty commercial entrance

SD-17 – Kerb and pavement reinstatement

SD-18 – New kerb crowning in existing kerb and watertable

SD-19 – Footpath reinstatement detail

SD-20 – Double side entry pit without deflectors

SD-21 – Double side entry pit with deflectors

SD-22 – Side entry pit detail without benching

SD-23 – Side entry pit detail with benching

SD-24 – 900 x 900mm side entry pit with benching

SD-25 – 600 x 600mm junction box / grated inlet pit without benching

SD-26 – 900 x 900mm junction box / grated inlet pit without benching

SD-27 – 600 x 600mm junction box / grated inlet pit with benching

SD-28 – 900 x 900mm junction box / grated inlet pit with benching

SD-29 – Stormwater connection for rear allotment drain (council connection)

SD-30 – Stormwater connection rear allotment drain (residential connection)

SD-31 – Paved footpath detail for new developments

SD-32 – Paved 1 concrete footpath detail

SD-33 – Backfilling of trenches below sub-base level for footpaths

SD-34 – Backfilling of trenches below sub-base level for footpaths (no pavement detail)

SD-35 – Backfilling of trenches below sub-base level for roads

SD-36 – Backfilling of trenches below sub-base level for roads (no pavement detail)

SD-37 – Footpath pavement reinstatement of trenches

SD-38 – Footpath pavement reinstatement of trenches

SD-39 – Road pavement reinstatement of trenches

SD-40 – Underground electrical service installation

SD-41 – Gravel filled soakage pit

SD-42 – Complying stormwater disposal to street water table

SD-43 – Tree protection detail road ballast RB65

SD-44 – Centre blister detail

SD-45 – Roundabout cross-section

SD-46 – Median cross-section detail

SD-47 – Removable bollard

SD-48 – Recycled plastic bollard

SD-49 – Collapsible bollard

SD-50 – Mini roundabout details

SD-51 – Unsealed access road reinstatement of trenches

SD-52 – Single half access gate

SD-53 – Single access gate

SD-54 – Double access gate