Standard Civil Details

The following downloads provide standard details relating to civil engineering infrastructure.

This information is relevant to Architects, Building Designers and Engineers in the preparation of documentation for Development Applications or Civil Engineering Works and the general public for any kind of construction you may wish to undertake on Council land (eg. driveways, drainage, trench reinstatement, footpath reinstatement).

For further information, please contact Civil Design, Technical Services (08)84068222

SD-01 – 150mm barrier kerb with 380mm fall-in water table

SD-02 – 150mm barrier kerb with 380mm fall-out water table

SD-03 – 200mm barrier kerb with 380mm fall-in water table

SD-04 – 200mm barrier kerb with 380mm fall-out water table

SD-05 – 150mm semi-mountable kerb for splitter island 

SD-06 – 150mm semi-mountable kerb with 300mm fall-out kerb 

SD-07 – 70mm mountable kerb for mini-roundabouts 

SD-08 – 100mm mountable kerb with 380mm gutter for house drain outlets 

SD-09 – 100 / 150mm high barrier kerb for inner annulus of regular roundabout 

SD-10 – 760mm spoon drain 

SD-11 – Kerb ramp detail (G6) 

SD-12 – Residential driveway kerb crossing for 150mm fall-in kerb 

SD-13 – Residential driveway longitudinal crossover detail 

SD-14 – Complying residential entrance 

SD-15 – Complying light duty commercial entrance 

SD-16 – Complying heavy duty commercial entrance 

SD-17 – Kerb and pavement reinstatement 

SD-18 – New kerb crowning in existing kerb and watertable 

SD-19 – Footpath reinstatement detail 

SD-20 – Double side entry pit without deflectors 

SD-21 – Double side entry pit with deflectors 

SD-22 – Side entry pit detail without benching 

SD-23 – Side entry pit detail with benching 

SD-24 – 900 x 900mm side entry pit with benching 

SD-25 – 600 x 600mm junction box / grated inlet pit without benching 

SD-26 – 900 x 900mm junction box / grated inlet pit without benching 

SD-27 – 600 x 600mm junction box / grated inlet pit with benching 

SD-28 – 900 x 900mm junction box / grated inlet pit with benching 

SD-29 – Stormwater connection for rear allotment drain (council connection) 

SD-30 – Stormwater connection rear allotment drain (residential connection) 

SD-31 – Paved footpath detail for new developments 

SD-32 – Paved  1 concrete footpath detail 

SD-33 – Backfilling of trenches below sub-base level for footpaths 

SD-34 – Backfilling of trenches below sub-base level for footpaths (no pavement detail) 

SD-35 – Backfilling of trenches below sub-base level for roads 

SD-36 – Backfilling of trenches below sub-base level for roads (no pavement detail) 

SD-37 – Footpath pavement reinstatement of trenches 

SD-38 – Footpath pavement reinstatement of trenches 

SD-39 – Road pavement reinstatement of trenches 

SD-40 – Underground electrical service installation 

SD-41 – Gravel filled soakage pit 

SD-42 – Complying stormwater disposal to street water table 

SD-43 – Tree protection detail road ballast RB65 

SD-44 – Centre blister detail 

SD-45 – Roundabout cross-section 

SD-46 – Median cross-section detail 

SD-47 – Removable bollard 

SD-48 – Recycled plastic bollard 

SD-49 – Collapsible bollard 

SD-50 – Mini roundabout details 

SD-51 – Unsealed access road reinstatement of trenches 

SD-52 – Single half access gate 

SD-53 – Single access gate 

SD-54 – Double access gate